![]() ![]() ![]() Either way, installing the manifold is best done when building your aquarium but can also be installed after the fact as long as you have the space. #Plumbing manifold how toHow to Build a ManifoldĪssembling a manifold is fairly easy with readily available PVC plumbing parts and we also sell a pre-assembled manifold with two 1/2" water lines which can make things easy for those of you who may not be confident in your plumbing skills. It's sometimes just better to have the manifold, even if you're not using it right away. You don't have to have an immediate plan for all of the connections on your manifold because you can just as easily close off the connection for use down the road. ![]() The number of branches in your manifold can vary but most tanks will have no more than three, typically only one or two are all that you need. Each branch of the manifold can be adjusted to suit various pipe diameters and flow is controlled using a ball valve.Ī single manifold will have the primary return line plus one branch for connection with a piece of equipment, a dual manifold has two branches for connection with two separate pieces of equipment, and so on. The most common use for a manifold is to feed water into a fluidized media reactor because this is such a common piece of equipment but it also can work great for feeding a UV, calcium reactor, turf scrubber, macroalgae reactor, and pretty much anything that needs a water feed from your aquarium. They can come in handy because you won't need multiple small feed pumps submersed or plumbed into your sump and can help keep things tidy under the tank. As it pertains to an aquarium, a manifold creates branches of your main return line to not only supply water to your display, but also feed water into reactors, UV sterilizers, and other applicable aquarium equipment using a single pump. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |